What are the causes and resolutions of Epson Printer Error ?
Many users also reported they have experienced the error although they've not installed any paper cassettes. Therefore, in this situation it's likely that there's an issue with the printer, or the printer is damaged , and as a result, is not able to establish a connection to the printer's connector. So, we've conducted our own research and discovered that there are a variety of reasons for why you're seeing an error when printing.
Below, take an overview of the most common causes of the error. Follow the steps to fix the Epson error code 0x97
- The Connection to Your Printer: If your printer isn't properly connected to your computer, this error may appear. Make sure you ensure that the connection between the printer and your device correctly.
- Printing Settings: If you are using more than one printer, make sure that you can determine if the Epson one has been set to be the primary printer. If not, then it is not. If it's not your default printer the Epson error message that states that non-printing options are up.
- Older Printer driver: The driver plays essential roles to enable it to operate correctly and, therefore, if the driver for your printer is not up-to-date this error could appear. In this case, upgrading the printer driver could help you.
- Print Spooler Services: The print spooler function installed on your PC helps your computer connect to your printer. However, If it's not working this error could appear.
- Utilizing too many cassettes of paper: This is the most important reason with the error message, so when you've installed excessive paper cassette units it could cause the error. In this case, you should take out the additional unit and examine whether the error is still visible or not.
- A damaged item: If the product is damaged or is corrupted, it can cause issues when printing and will show errors. Therefore, ensure that your product isn't damaged and is functioning properly. Then, these could be the causes which can cause Epson Error code 0*97 then follow the suggestions each one by one to fix the problem fully.
- Turn off the printer, then remove all cable power from the outlet on the wall for a the minimum
- Next Next, turn to your printer to ensure that it is making sure that it is working properly. Also, check whether the issue is fixed.
- Ensure the printer is connected to the computer. disconnect the wires, clean the ports, and then connect the wires
- Make sure you connect to the USB cable through another USB port on your computer.
- If you're using a hub to connect your printer, disconnect the printer from your hub, then join it to your computer.
- Try switching the entire cable to see whether the issue is fixed or not.
- Verify that the speed of your network is correct, and verify the network devices such as the router or modem.
- You can then check the status light for network connectivity for your printer.
- If your printer is connected to the network cable, test changing the cable and check if it is working for you.
- Reconnect your printer and computer to the network at your workplace or home.
- Make sure that Bluetooth is in both devices.
- Try re-pairing your computer to the printer.
- Verify if you're within the Bluetooth range of the device , or not.
1. Remove your Power Cable
It is possible that your printer is struggling with some kind of internal bugs and glitches. In this instance unplugging, and then connecting the power cable can help you to fix the issue. Follow these steps to accomplish this:
2. Check the Connection of Your Printer
It could be the result of some kind of connection issue that is creating Epson error codes to indicate that non-printing features to work. Therefore, make sure you check your printer's connection.
Wired Printer
Network Printer
Bluetooth Printer
Here are forum creation sites :-
Comments
Post a Comment